• Some cleaning agents are corrosive in nature and may cause damage to the product. If you do not rinse and dry the
product well, a corrosive residue may be left on the surface of the product that could cause premature corrosion of
critical components. Failure to follow these cleaning instructions may void your warranty.
RReemmoovvee iiooddiinnee
1. Make a solution of 1 to 2 tablespoons of sodium thiosulfate in a pint of warm water. Use the solution to wipe down the
stained area.
2. Clean the stain as soon as possible after the stain occurs.
3. If stains are not immediately removed, allow solution to soak or stand on the mattress before you wipe the mattress.
4. Rinse the mattresses which have been exposed to the solution with clear water before you return the mattresses to
service.
NNoottee -- Failure to follow these directions when you use these types of cleaners may void this product’s warranty.
SSppeecciiaall iinnssttrruuccttiioonnss
Hook and loop fasteners Saturate with disinfectant, rinse with water, and allow the
solution to evaporate.
Solids or stains Use neutral soaps and warm water. Do not use harsh
cleansers, solvents, or abrasive cleaners.
Hard-to-clean spots Use standard household cleansers or vinyl cleansers and a
soft bristle brush on troublesome spots or stains. Pre-soak
dried-on soil.
Laundering Laundering is not recommended. Laundering may
decrease the useful life of the mattress.
1115-309-001 Rev AD.0 57 EN
To Next Page
Loading...
Need help?
General
