Stryker Prime Series User Manual

NNoottee -- Only use the push handles as push/pull devices unless otherwise specified to avoid product damage.
RRaaiissiinngg tthhee ssiiddeerraaiill
WWAARRNNIINNGG
• Always use extra caution when you use a mattress thicker than 2.5 in. or a mattress overlay with PPrriimmee XX.
• Always lock the siderails in the highest height position and lower the product to the lowest height position when you
leave a patient unattended.
• Always lock the siderails in the highest height position with the sleep surface horizontal and lower the product to the
lowest height position when you transport a patient.
• Always keep the patient’s limbs away from the siderail spindles when you raise or lower the siderail.
• Do not allow the siderails to lower on their own.
To raise the siderail:
1. Use two hands to grasp the siderail.
2. Lift the siderail toward the foot end of the product until the yellow release latch clicks into place. Pull to make sure that
the siderail is latched.
NNoottee
• There is a dual siderail release latch option available with latches on both ends of the product.
• Do not use siderails as restraint devices to keep the patient from exiting the product. The siderails keep the patient from
rolling off the product. The operator must determine how much restraint is needed to make sure that the patient is safe.
• You can use the foot end of the siderail top rail as a push/pull device.
• Siderails only lock in the highest height position.
LLoowweerriinngg tthhee ssiiddeerraaiill
WWAARRNNIINNGG
• Always use extra caution when you use a mattress thicker than 2.5 in. or a mattress overlay with PPrriimmee XX.
• Always lock the siderails in the highest height position and lower the product to the lowest height position when you
leave a patient unattended.
• Always lock the siderails in the highest height position with the sleep surface horizontal and lower the product to the
lowest height position when you transport a patient.
• Always keep the patient’s limbs away from the siderail spindles when you raise or lower the siderail.
• Do not allow the siderails to lower on their own.
To lower the siderail:
1. Use one hand to grasp the siderail.
2. Use the other hand to pull up on the yellow release latch.
3. Lift and guide the siderail toward the head end of the product until the yellow release latch clicks into place. Pull to make
sure that the siderail is latched.
NNoottee
• There is a dual siderail release latch option available with latches on both ends of the product.
• Do not use siderails as restraint devices to keep the patient from exiting the product. The siderails keep the patient from
rolling off the product. The operator must determine how much restraint is needed to make sure that the patient is safe.
• You can use the foot end of the siderail top rail as a push/pull device.
• Siderails only lock in the highest height position.
1115-309-001 Rev AD.0 25 EN

Stryker Prime Series Specifications

General

Model	Prime Series
Category	Medical Equipment
Power Requirements	120V AC, 60Hz
Battery Backup	Yes
Type	Medical Bed
Weight Capacity	500 lbs
Features	integrated scale
Compatibility	Compatible with Stryker