12 SM-7100 REV 01 www.stryker.com
Cleaning
Cleaning the siderails
WARNING
• Do not directly spray or saturate the siderail control panel, patient control pendant, or nurse control pendant with
cleaners.
• Do not use sharp objects to clean the siderail control panel.
• Do not use abrasive powder, steel wool, or similar materials that may damage the product surface.
• Do not use Virex
®
TB for product cleaning.
• Do not use acid-based chemicals or flammable chemicals, such as gasoline, diesel, or acetone for cleaning
purposes.
To clean the siderails:
1. Raise the siderail.
2. Latch the siderail.
3. Use a clean, soft, damp cloth to wipe down the siderail and the siderail control panel.
4. Allow the siderail control panel to dry thoroughly.
To Next Page
Loading...
Need help?
General
