10 SK-7500 REV 00 www.stryker.com
Disinfecting
Suggested disinfectants:
• Quaternary cleaners without glycol ethers (active ingredient - ammonium chloride)
• Chlorinated bleach solution (5.25% - less than 1 part bleach to 100 parts water)
• 70% Isopropyl alcohol
Always follow the disinfectant’s instructions for appropriate contact time and rinsing requirements.
Avoid oversaturation and make sure that the product does not stay wet longer than the chemical manufacturer’s
guidelines for proper disinfecting.
To disinfect the product:
1. Thoroughly clean and dry the product before you apply disinfectants.
2. Apply recommended disinfectant solution by spray or pre-soaked wipes
Note: Make sure that you follow the disinfectant’s instructions for appropriate contact time and rinsing
requirements.
3. To disinfect mechanisms, lift the backrest and leg rest up to the highest height.
4. Wipe product surfaces and mechanisms with a clean, dry cloth to remove any excess liquid or cleaning agent.
5. Allow the product to dry completely before returning to service.
To Next Page
Loading...
