Micro Series
1-68 Micro Series
Document generated: 29.06.17
SW V1.1
On the Meter tab, the parameters of the mixer internal metering can be set.
[3]
[1]
[2]
[1] Headroom Sets the top, red area of the meter. The default value is 9dB, this means that
meter values above -9dBFS are then displayed in red meter bar elements.
[2] Operation Range This is the mid section of the meter where the signal is displayed in green
meter bar elements.
Meter bar elements below the operation range are yellow.
[3] Integration Time Sets the meters integration time.
None 0 ms
Fast 1 ms
IEC Type I 5 ms
IEC Type II 10 ms
To Next Page
Loading...
