1-8 Sun Fire V210 and V240 Servers Administration Guide • December 2005
1.2.4 To Display Locator LED Status
● Do one of the following:
■ As superuser, type:
■ At the ALOM command-line interface, type:
1.2.5 Front Panel
Access the front panel by opening the bezel, which you do by rotating it forward. It
has no clips or locks to hold it closed, only the spring retention built into its hinges.
The front panel contains the following:
■ On/Standby switch
■ Hard drive
■ DVD-ROM drive
■ System configuration card
■ keyswitch—Sun Fire V240 server
# /usr/sbin/locator
sc> showlocator
To Next Page
Loading...
