Sun Microsystems Fire V210 User Manual

6-6 Sun Fire V210 and V240 Servers Administration Guide • December 2005
3. Type:
Where value is either min or max depending on the desired range of coverage.
4. Type:
5. Type:
Note – Status and error messages could be displayed in the console window. If
POST detects an error, it displays an error message describing the failure.
6.4.3 Controlling POST Diagnostics
You control POST diagnostics, and other aspects of the boot process by setting
OpenBoot configuration variables. Changes to OpenBoot configuration variables
generally take effect only after the system is restarted.
TABLE 6-2 lists the most
important and useful of these variables. You can find instructions for changing
OpenBoot configuration variables in
Section 6.9, “OpenBoot Configuration
Variables” on page 6-26.
ok setenv diag-level value
ok setenv diag-trigger user-reset
ok setenv diag-trigger all-resets

Sun Microsystems Fire V210 Specifications

General

Brand	Sun Microsystems
Model	Fire V210
Category	Server
Language	English