Sun Microsystems Fire V210 - To Switch to the ALOM Prompt; To Switch to the Server Console Prompt

3-6 Sun Fire V210 and V240 Servers Administration Guide • December 2005
Tip – For additional information see: http://docs.sun.com. Search for ALOM to
find the ALOM documentation.
3.4.1 To Switch to the ALOM Prompt
● Type the following:
Note – When you switch to the ALOM prompt, you are logged in with the userid
“admin”. See Section 3.3, “Setting the admin Password” on page 3-5.
3.4.2 To Switch to the Server Console Prompt
● Type the following:
More than one ALOM user can be connected to the server console stream, but only
one user is permitted to type input characters to the console.
If another user is logged on and has write capability, you will see the following
message after issuing the console command:
To take console write capability away from another user, type:
# #.
sc> console
sc> Console session already in use. [view mode]
sc> console -f