Sun Microsystems Fire V210 - Page 7

Contents vii
6.7.2 Solaris System Information Commands 6–17
6.7.2.1 prtconf command 6–18
6.7.2.2 prtdiag Command 6–19
6.7.2.3 prtfru Command 6–22
6.7.2.4 psrinfo Command 6–23
6.7.2.5 showrev Command 6–24
6.7.3 To Run Solaris System Information Commands 6–24
6.8 Recent Diagnostic Test Results 6–25
6.8.1 To View Recent Test Results 6–25
6.9 OpenBoot Configuration Variables 6–26
6.9.1 To View and Set OpenBoot Configuration Variables 6–26
6.9.1.1 To View OpenBoot Configuration Variables 6–26
6.9.1.2 To Set OpenBoot Configuration Variables 6–26
6.10 Additional Diagnostic Tests for Specific Devices 6–27
6.10.1 Using the probe-scsi Command to Confirm That Hard Drives
are Active 6–27
6.10.2 Using probe-ide Command to Confirm That the DVD or CD-
ROM Drive is Connected 6–28
6.10.3 Using watch-net and watch-net-all Commands to Check the
Network Connections 6–29
6.11 Automatic System Recovery 6–30
6.11.1 Auto-Boot Options 6–31
6.11.2 Error Handling Summary 6–31
6.11.3 Reset Scenarios 6–32
6.11.4 To Enable ASR 6–32
6.11.5 To Disable ASR 6–33
Index Index–1