Sun Microsystems Fire V210 - Page 88

6-12 Sun Fire V210 and V240 Servers Administration Guide • December 2005
CODE EXAMPLE 6-1 OpenBood Diagnostics Error Message
To change the system defaults and the diagnostics settings after initial boot, refer to
the OpenBoot PROM Enhancements for Diagnostic Operation (817-6957). You can view
or print this document by going to:
http://www.sun.com/documentation
Testing /pci@1e,600000/isa@7/flashprom@2,0
ERROR : There is no POST in this FLASHPROM or POST header is
unrecognized
DEVICE : /pci@1e,600000/isa@7/flashprom@2,0
SUBTEST : selftest:crc-subtest
MACHINE : Sun Fire V210
SERIAL# : 51347798
DATE : 03/05/2003 15:17:31 GMT
CONTR0LS: diag-level=max test-args=errors=1
Error: /pci@1e,600000/isa@7/flashprom@2,0 selftest failed, return code = 1
Selftest at /pci@1e,600000/isa@7/flashprom@2,0 (errors=1) .............
failed
Pass:1 (of 1) Errors:1 (of 1) Tests Failed:1 Elapsed Time: 0:0:0:1