Sun Microsystems Ultra 45 User Manual

9-10 Sun Ultra 45 and Ultra 25 Workstations Service and Diagnostics Manual • May 2006
9.5.3.1 Options
TABLE 9-4 describes options for the prtconf command and how those options can
help troubleshoot the Sun Ultra 45 or Ultra 25 workstation.
The following example shows output for the prtconf command.
TABLE 9-4 Options for prtconf
Option Description How It Can Help
No option Displays the device tree of
devices recognized by the OS.
If a hardware device is recognized, then it is probably
functioning properly. If the message “
(driver not
attached)
” is displayed for the device or for a sub-
device, then the driver for the device is corrupt or missing.
-D
Similar to the output of no
option, however the device
driver is listed.
Lists the driver needed or used by the OS to enable the
device.
-p
Similar to the output of no
option, yet is abbreviated.
Reports a brief list of the devices.
-V
Displays the version and date
of the OpenBoot PROM
firmware.
Provides a quick check of firmware version.
# prtconf
System Configuration: Sun Microsystems sun4u
Memory size: 1024 Megabytes
System Peripherals (Software Nodes):
SUNW,Sun Ultra 45
packages (driver not attached)
SUNW,builtin-drivers (driver not attached)
deblocker (driver not attached)
disk-label (driver not attached)
terminal-emulator (driver not attached)
dropins (driver not attached)
kbd-translator (driver not attached)
obp-tftp (driver not attached)
SUNW,i2c-ram-device (driver not attached)
SUNW,fru-device (driver not attached)
SUNW,asr (driver not attached)
ufs-file-system (driver not attached)
chosen (driver not attached)
openprom (driver not attached)
client-services (driver not attached)
options, instance #0
aliases (driver not attached)
. . .

Sun Microsystems Ultra 45 Specifications

General

Brand	Sun Microsystems
Model	Ultra 45
Category	Desktop
Language	English