Sun Microsystems Ultra 45 User Manual

Chapter 4 Replacing Storage Devices 4-3
FIGURE 4-1 Removing the Hard Drive
4.1.2 Installing a Hard Drive
Caution – Use proper ESD grounding technique when handling components. Wear
an antistatic wrist strap and use an antistatic mat. Store ESD-sensitive components in
antistatic bags before placing them on any surface.
1. Power off the system and attach an antistatic wrist strap. Open and position the
chassis, and remove the access panel.
Refer to “Powering Off the Workstation” on page 2-4.
HDD0

Sun Microsystems Ultra 45 Specifications

General

Brand	Sun Microsystems
Model	Ultra 45
Category	Desktop
Language	English