23
5.4.2 During Hoisting
• Ensure safe and reliable connections of all slings.
• Ensure that the product is steady and not tilting during the whole hoisting process.
• The product should be hoisted vertically. Never drag the product on the ground or the top
of the lower product, and never pull and push it on any surface.
• Suspend the hoisting when the product is hoisted 300 mm from the supporting surface to
check the connection between slings and the product. Continue hoisting only after con-
firming a reliable connection.
• When the product is in place, place it lightly and smoothly. It is strictly forbidden to throw
it to places outside the vertical landing place.
• The outdoor cabinet should be placed on a solid and flat site with good drainage and no
obstacles or protrusions.
• Avoid scratching the product during hoisting.
figure 5-2 Hoisting by One Crane
System Manual 5 Mechanical Mounting
To Next Page
Loading...
Need help?
General