Sungrow MVS4480-US System Manual

30
6.3.2 Open Product Door
Step 1 Remove the M8 bolts at the upper and lower ends of the removable beam around the
product.
Step 2 Open the cabinet door.
Step 3 Fix the doors of the inverter unit cabinet and power distribution cabinet.
Step 4 Remove the protective cover of the wiring area.
- - End
6.3.3 Cables
The cables must meet the following requirements:
• The current carrying capacity of the cable should meet the requirements. Factors affect-
ing the current-carrying capacity of a conductor include but are not limited to:
– Environmental conditions
– Type of the insulation material of the conductor
– Cabling method
– Material and cross-sectional area of the cable
6 Electrical Connection System Manual

Sungrow MVS4480-US Specifications

General

Brand	Sungrow
Model	MVS4480-US
Category	Inverter
Language	English