86
Step 3 Perform paint repair for the scratched parts with a soft brush after the surface is dried; brush
the paint as uniform as possible.
- - End
11.3.5.3 Broken Primer
Tools
No. Name Source
1
Abrasive paper
Beyond the scope of supply
2
Cleaning cloth
3
Water
4
Alcohol
5
Zinc primer
6
Brush
7
RAL7035 oil paint
Step 1 Polish the damaged parts with abrasive paper to remove rust and other burrs for a smooth
surface.
Step 2 Wet the cleaning cloth with water or 97% alcohol, and scrub the damaged parts to remove
surface stains and dust.
Step 3 Spray the parts with base material exposed with zinc primer for protection after drying the
surface. Ensure to spray to cover the bare base material completely.
11 Routine Maintenance System Manual