50
After removal, re-install the protective cover.
7.2.7 Draining Oil from Transformer
If the transformer is transported with a full oil tank, drain some oil from the transformer after
the product is transported to the site.
No. Device Source
1 Clean hoses and oil tank
Not included in the scope of supply
2 Cleaning cloth
3 Wrench
4 Adjustable wrench
5 Hose connector
6 Pipe clamp
Step 1 Ensure that the drain valve is closed.
Step 2 Remove the cover plate of the drain valve.
Step 3 Remove the cover plate of the drain valve.
7 Powering up and Powering down System Manual
To Next Page
Loading...
Need help?
General