Sunways AT 5000 - Page 106

106
Without DHCP
If there is no DHCP server in your net
-
work, you must set an IP address still
not used in the network on the AT solar
inverter (see the chapter Network setting
on solar inverter).
Ask your network administrator for the
necessary settings for IP address, net
mask and gateway.
After the network configuration is com
-
pleted you can start the Sunways Browser
by entering the IP address of the solar
inverter in the address line of your web
browser.
Connection via Ethernet network
PC
PC
Main unitSecondary unit
Max. total CAN bus
length: 100 m
INVERTER INVERTER
Hub
Switch
Router
Max. Ethernet
connection: 100 m