Sunways AT 5000 - Networking Solar Inverters Via CAN Bus

40
Networking solar inverters via CAN bus
The solar inverters can be networked
with each other via the CAN bus inter
-
face.
Use the included Ethernet cable to net-
work the solar inverters with each other.
One terminating resistor (1) must be on
the first and last solar inverter in the se
-
ries. The pluggable terminating resistors
are contained in the delivery scope.
The total length of the CAN bus network
may not exceed 100 m!
Networking via CAN bus
1 1
Main unit Secondary units