122
Function buttons
The settings are saved in the solar
inverter with «Send».
The settings currently stored in the solar
inverter are displayed with «Read».
With «Modem Test» you can test the mo
-
dem connection to the set Internet pro
-
vider. You receive a reply as to whether
dialling in was successful.
Before conducting the modem test, the
settings must be stored in the solar in
-
verter with «Send».
Email settings
To enable the solar inverter to send
Emails, the Email setting must be stored
with the Sunways Browser. The settings
can be accessed via «Settings – Network»
in the section «Email Settings».
Requirements:
· Communication software at least
Version 2.0002
· When dialling in via modem, the cor
-
rect dial-in settings must be stored (see
Internet dial-in via modem).
To Next Page
Loading...
