Sunways AT 5000 - Connection Via an Existing Ethernet Network

105
After the network configuration is com-
pleted you can start the Sunways Browser
by entering the IP address of the solar
inverter in the address line of your web
browser.
For more complex network configura
-
tions, please contact your network
administrator.
6.6 Connection via an existing Ethernet
network
If a home or company network exists,
then you can integrate the AT solar
inverter directly in the network as a net
-
work user.
Connect your PC and the solar inverter
with a CAT5 Ethernet cable with RJ45
sockets 1:1 for a hub, or crossed for a
switch.
The main unit is connected to the net
-
work as standard.
With DHCP
If a DHCP server is present in your net
-
work, you can activate DHCP on the solar
inverter. In this case the solar inverter
obtains the network settings automati
-
cally. You can display the assigned IP ad
-
dress via the LCD display (menu «Settings
– Network – Ethernet»).