77
NOTE:
• If the lever is not set to a correct position, the error message is
displayed.
Click the “OK” button, set the lever to the correct position, and
click the “Set” button.
• For the dual control box, you must simultaneously operate
both the levers.
• To change the dual station settings, select “First Station”,
“Second Station”, and “Both First and Second Stations.”
• After all the lever positions have been registered, the following
confirmation message is displayed:
(4) Clicking the “OK” button after all the lever posi-
tions have been registered displays the follow-
ing window:
Click the “OK” button to terminate setting
change.
To Next Page
Loading...
