78
Full Tilt Down Position
(1) Clicking the “Full Tilt Down Position” button
from the SETTING CHANGE dialog box dis-
plays the window.
(2) Operate the PTT switch of the outboard motor
to perform full tilt down.
Clicking the “OK” button registers the full tilt
down position and redisplays the SETTING
CHANGE completed window.
Click the “OK” button to complete setup
change.
SYSTEM CHECK
Check system settings.
System configuration
(1) Clicking the “SYSTEM CHECK” button from the Main Menu dialog box displays the following menu win-
dow.
To Next Page
Loading...
