3-56 ENGINE
• Apply SUZUKI SUPER GREASE “A” to the O-rings and pin
grooves.
X 99000-25030: SUZUKI SUPER GREASE “A”
(or equivalent)
• Install the rollers and pins
2
.
• Install the spring seat by aligning the hole.
• Install the spring and spring plate by aligning the spring ends
with the holes.
• Compress the spring
3
with the special tool.
\ 09922-31420: Clutch spring compressor
To prevent damaging the oil seal lip from during
installation, slide the lip using a 0.1-mm steel sheet as
a guide.
To Next Page
Loading...
