ENGINE 3-19
• Install the breather plate
2
.
• Apply a small quantity of THREAD LOCK SUPER “1322” to
the breather plate bolts and tighten then securely.
H99000-32080: THREAD LOCK SUPER “1322”
CYLINDER HEAD
DISASSEMBLY
• Remove the intake pipe
1
and insulator
2
.
• Remove the cam chain guide
3
.
• Remove the camshaft retainer
4
.
• Remove the rocker arm shafts
5
.
Identify the position of each removed part. Organize
the parts in their respective groups (i.e., exhaust or
intake) so that they can be installed in their original
locations.
To Next Page
Loading...
