Suzuki LT-Z90K7 2007 - Chassis Nuts and Bolts

2-24 PERIODIC MAINTENANCE
CHASSIS NUTS AND BOLTS
Check that all chassis nuts and bolts are tightened to their specified torque. (Refer to page 2-25 for the loca-
tions of the following nuts and bolts.)
Tighten initially at 1 month and every 3 months there-
after.
Item N·m kgf-m lb-ft
1
Handlebar clamp bolt 25 2.5 18.0
2
Front suspension arm pivot nut 65 6.5 47.0
3
Tie-rod end nut 50 5.0 36.0
4
Tie-rod locknut 29 2.9 21.0
5
Steering knuckle nut 60 6.0 43.5
6
Front brake cam lever nut 8 0.8 6.0
7
Steering shaft lower nut 35 3.5 25.5
8
Steering shaft holder bolt 23 2.3 17.0
9
Front brake cable equalizer bolt 7 0.7 5.0
0
Front shock absorber bolt (upper and lower) 50 5.0 36.0
A
Front hub nut 65 6.5 47.0
B
Wheel set nut (front and rear) 55 5.5 40.0
C
Swingarm pivot nut 102 10.2 74.0
D
Rear shock absorber bolt (upper) 29 2.9 21.0
E
Rear shock absorber bolt (lower) 94 9.4 68.0
F
Rear hub nut 75 7.5 54.0
G
Rear brake cam lever nut 8 0.8 6.0
H
Rear axle housing bolt 110 11.0 79.0
I
Rear sprocket bolt 28 2.8 20.0
J
Footrest bolt 55 5.5 40.0
K
Rear axle nut 180 18.0 130.0