SERVICING INFORMATION 7-25
TIGHTENING TORQUE
ENGINE
FUEL
ITEM N·m kgf-m lb-ft
Cylinder head cover bolt
Initial 10 1.0 7.0
Final 14 1.4 10.0
Cylinder head nut
M12 25 2.5 18.0
M10 10 1.0 7.0
Valve clearance adjuster locknut 10 1.0 7.0
Cam sprocket bolt 11 1.1 8
Cam chain guide mounting bolt 10 1.0 7.0
Cam shaft retainer screw 5.5 0.55 4.0
Cam chain tension adjuster mounting bolt 10 1.0 7.0
Generator rotor nut 80 8.0 58.0
Limit clutch nut 75 7.5 54
Clutch shoe nut 60 6.0 43.5
Fixed drive face nut 50 5.0 36.0
Starter clutch bolt 10 1.0 7.0
Generator coil mounting bolt 10 1.0 7.0
CKP sensor mounting bolt 6 0.6 4.5
Crankcase bolt 10 1.0 7.0
Generator rotor cover bolt 10 1.0 7.0
Generator cover cap 15 1.5 11.0
Valve timing inspection plug 17.5 1.75 12.5
Crank case cover bolt 10 1.0 7.0
Engine oil drain plug 17.5 1.75 12.5
Final reduction gear box cover bolt 10 1.0 7.0
Final reduction gear box drain 10 1.0 7.0
Engine mounting nut
(Front) 100 10 72.5
(under and rear) 60 6.0 43.5
Engine mounting upper bracket 35 3.5 25.5
Muffler mounting bolt 23 2.3 16.5
Muffler clamp bolt 12 1.2 8.5
Exhaust pipe nut 23 2.3 16.5
Recoil starter friction plate bolt 5 0.5 3.5
Spark plug 11 1.1 8.0
Carburetor mounting bolt 6 0.6 4.5
Intake pipe bolt 6 0.6 4.5
Main oil gallery plug 12 1.2 8.5
Starter motor lead wire mounting bolt 4 0.4 3.0
Starter relay lead wire mounting bolts 4.5 0.45 3.0
Rear axle housing bolt 60 6.0 43.5
ITEM N·m kgf-m lb-ft
Fuel valve bolt 4.5 0.45 3.0
To Next Page
Loading...
