Suzuki LT-Z90K7 2007 - Reassembly and Installation

5-16 CHASSIS
• Remove the wheel hub inner bearing with the special tool.
\ 09941-50111: Bearing remover
REASSEMBLY AND INSTALLATION
BEARING
• Apply SUZUKI SUPER GREASE “A” to the wheel hub bear-
ings.
X
99000-25010: SUZUKI SUPER GREASE “A” or equivalent
• Install the wheel hub inner bearing with the special tool.
\ 09913-70210: Bearing installer set

• Install the wheel hub outer bearing with the special tool and
suitable size socket wrench.
\ 09924-84510: Bearing installer set

A
: Clearance
* First install the wheel hub inner bearing, then install
the spacer and outer bearing.
* The sealed cover of the bearing must face outside.
* The removed bearing must be replaced with a new
one
The removed bearing must be replaced with a new
one.
Outside Inside