2-14 PERIODIC MAINTENANCE
DRIVE BELT
REMOVAL
• Remove the left footrest mudguard. (
5-5)
• Remove the left footrest bar
1
.
• Remove the front cooling duct connector
2
and rear cooling
duct connector
3
.
• Remove the crankcase cover
4
.
• Remove the crankcase cover gasket
5
and dowel pin.
• Remove the fixed drive face nut
6
and fixes drive face fan
7
with the special tool.
\ 09930-40113: Rotor holder
Inspect every 3 months.
Replace every 6 months.