6-12 ELECTRICAL SYSTEM
Step 3
1) Measure the starter relay voltage at the starter relay connectors (between Y/G
+
and B/W
-
) when the
starter button is pushed.
Is a voltage OK?
Step 4
1) Check the starter relay. (
6-16)
Is the starter relay OK?
STARTER MOTOR REMOVAL
• Disconnect the battery
-
lead wire.
• Remove the left footrest mudguard. (
5-5)
• Remove the starter motor mounting bolts
1
and engine grand
lead wire
2
.
• Disconnect the starter motor lead wire
3
.
YES Go to Step 4.
NO
• Faulty engine stop switch
• Faulty starter button
• Faulty parking brake switch
• Faulty ignition switch
• Poor contact of connector
• Open circuit in wiring harness
YES Poor contact of the starter relay
NO Faulty starter relay
To Next Page
Loading...
