CHASSIS 5-49
INSPECTION AND DISASSEMBLY
REAR SHOCK ABSORBER
Inspect the shock absorber body for oil leakage or damage.
If any defects are found, replace the shock absorber with a new
one.
REAR SHOCK ABSORBER DUST SEAL
• Remove the collars.
Inspect the dust seal lips and collars for wear or damage.
If any defects are found, replace the dust seals and collars with
new ones.
• Remove the dust seals.
REAR SHOCK ABSORBER BEARING
Inspect the bearings for abnormal noise and smooth movement.
Do not attempt to disassemble the rear shock
absorber. It is unserviceable.
To Next Page
Loading...
