CHASSIS 5-37
INSPECTION AND DISASSEMBLY
BRAKE DRUM
Inspect the brake drum and measure the brake drum I.D. to
determine the extent of wear. Replace the brake drum if the
measurement exceeds the service limit. The value of this limit is
indicated inside the brake drum.
\ 09900-20101:Vernier calipers
Brake drum I.D.:
Service Limit: 130.7 mm (5.14 in)
BRAKE SHOE
Inspect the brake shoes for wear or damage. If any wear or
defects are found, replace the brake shoes as a set.
REAR BRAKE DRUM OUTER SEAL
Inspect the rear drum outer seal and inner seal for wear or dam-
age. If any defects are found, replace them with new ones.
• Remove the rear brake inner seal with the special tool.
\ 09913-50121: Oil seal remover
REAR BRAKE DRUM COVER
Inspect the rear brake drum cover for wear or damage. If any
defects are found, rear drum cover with a new one.
Replace the brake shoes as a set. Otherwise braking
performance will be adversely affected.
To Next Page
Loading...
