5-40 CHASSIS
• Remove the rear axle housing bearings with the special tool.
\ 09930-30104: Sliding shaft
09923-74511: Bearing remover (¬20)
09923-73210: Bearing remover (¬17)
• Remove the spacer
1
.
REASSEMBLY AND INSTALLATION
Reassemble and install the rear brake and rear axle housing in
the reverse order of removal and disassembly.
Pay attention to the following points:
REAR SPROCKET AND REAR AXLE
• Install the dust seal with the special tool.
\ 09913-70210: Bearing installer
To Next Page
Loading...
