5-24 CHASSIS
REASSEMBLY AND INSTALLATION
STEERING KNUCKLE ARM
• Install the knuckle arm bush with the special tool.
\ 09924-84510: Bearing installer set
• Apply SUZUKI RESISTANCE GREASE to the knuckle arm
bushes, dust seals and spacer.
• Install the spacer and dust seals.
99000-25160: SUZUKI RESISTANCE GREASE
(or equivalent)
FRONT SUSPENSION
• Tighten the front suspension arm bolts to the specified torque.
" Front suspension arm pivot nut:
65 N·m (6.5 kgf·m, 47.0 lb-ft)
• Tighten the front shock absorber bolts to the specified torque.
" Front shock absorber upper bolt: 50 N·m
(5.0 kgf·m, 36.0 Ib-ft)
Front shock absorber lower bolt: 50 N·m
(5.0 kgf·m, 36.0 Ib-ft)
• Tighten the knuckle arm nut to the specified torque and install
the cotter pin.
" Steering knuckle arm nut: 60 N·m (6.0 kgf·m, 43.5 Ib-ft)
The removed cotter pin must be replaced with a new
one.
To Next Page
Loading...
