3-38 ENGINE
OIL PUMP
DISASSEMBLY
• Remove the circrip
1
.
• Remove the oil pump sprocket
2
.
• Remove the oil pump case cover
3
.
INSPECTION
Inspect the outer rotor
1
and inner rotor
2
for any scratches or
other damage. If any defects are found, replace them with new
ones.
Rotate the oil pump by hand and check that it moves smoothly.
If it does not move smoothly, replace the oil pump assembly.
RESASSEMBLY
• Install the pump cover
1
.
* Do not attempt to disassemble the oil pump assem-
bly.
* The oil pump is available only as an assembly.
To Next Page
Loading...
