5-14 CHASSIS
INSPECTION AND DISASSEMBLY
BRAKE DRUM/WHEEL HUB
Inspect the brake drum and measure the brake drum I.D. to
determine the extent of wear. Replace the brake drum if the
measurement exceeds the service limit.
\ 09900-20101: Vernier calipers
Brake drum I.D.:
Service Limit: 110.7 mm (4.35 in)
BRAKE SHOE
Inspect the brake shoes for wear or damage. If any defects are
found, replace it with new ones.
FRONT BRAKE DUST SEAL
Inspect the front brake drum dust seal
1
for wear or damage. If
any defects are found, replace it with a new one.
DUST SEAL
• Remove the axle spacer
2
.
Replace the brake shoes as a set, otherwise braking
performance will be adversely affected.
To Next Page
Loading...
