ENGINE 3-65
• Apply SUZUKI BOND “1215” to the mating surface of the right
crankcase as shown.
E 99000-31080: SUZUKI BOND “1215”
(or equivalent bond)
NOTE:
Use of SUZUKI BOND "1215" is as follows:
* Make surfaces free from moisture, oil, dust and other foreign
materials.
* Spread on surfaces thinly to form an even layer, and assemble
the crankcases within few minutes.
* Take extreme care not to apply any BOND "1215" to the oil
hole, oil groove and bearing.
* Apply to distorted surfaces as it forms a comparatively thick
film.
To Next Page
Loading...
