CHASSIS 5-27
• Remove the dust seals
6
and steering shaft lower dust seal
7
.
• Separate the tie-rod ends
8
, lock-nuts (
9
,
0
) and tie rods
A
.
TIE ROD/TIE ROD END
Inspect the tie-rod for distortion and the boot for wear and tie rod
end for smooth movement. If any defects are found, replace it
with a new one.
STEERING SHAFT AND HOLDER
Inspect the steering shaft for distortion or bend. If any defects
are found, replace it with a new one.
Inspect the steering shaft holders
1
, holder shafts
2
and dust
seals
3
for wear or damage. If any defects are found, replace
them with new ones.
The locknuts 6 have left-hand threads.
To Next Page
Loading...
