5-44 CHASSIS
• Install the spring
1
, limit indicator
2
and rear brake cam
lever
3
.
• Tighten the rear brake cam lever nut to the specified torque.
" Rear brake cam lever nut: 8 N·m (0.8 kgf·m, 6.0 Ib-ft)
NOTE:
Align the punched mark A on the cam lever with the slit B on
the camshaft.
REAR BRAKE DRUM COVER
• Install the rear brake inner seal with the special tool.
\ 09913-70210: Bearing installer
• Apply SUZUKI RESISTANCE GREASE to the rear brake
inner seal.
X 99000-25160: SUZUKI RESISTANCE GREASE
(or equivalent grease)
• Apply SUZUKI BOND “1215” to the rear brake cover.
E 99000-31110: SUZUKI BOND “1215”
(or equivalent bond)
• Install the rear brake drum cover so that the water drain tube
1
downward.
The removed rear brake inner seal must be replaced
with a new one.
To Next Page
Loading...
