Suzuki LT-Z90K7 2007 - Page 57

ENGINE 3-13
• Remove the generator rotor
2
using the special tool.
\ 09930-34980: Rotor remover
NOTE:
Temporarily install the generator rotor nut to the crankshaft, and
then remove the generator rotor using the special tool.

• Remove the generator rotor key
3
.
• Remove the starter driven gear
4
.
OIL PUMP
• Remove the oil pump cover
1
.
• Remove the oil pump assembly
2
, oil pump sprocket
3
and
oil pump chain
4
.
CAM CHAIN
• Remove the cam chain
1
.
Do not hit the generator rotor with a hammer, other-
wise the rotor may be damaged.