Suzuki LT-Z90K7 2007 - Page 61

ENGINE 3-17
• Remove the movable drive spacer
A
and movable drive face
assembly
B
.
NOTE:
Movable drive face disassembly. (3-51)
CRANKCASE
• Remove the left crankcase bolts.
• Separate the crankcase with the special tool.
\ 09920-13120: Crankcase separating tool
NOTE:
Fit the crankcase separating tool to the right crankcase, so that
the tool plate is paralleled with the end face of the crankcase.
• Remove the crankshaft from the crankcase with the special
tool.
\ 09920-13120: Crankcase separating tool