Swan Analytical Instruments AMI - 6 Maintenance; Maintenance Schedule; Stop of Operation for Maintenance

50 A-96.250.661 / 120418
AMI Sample Sequencer
Maintenance
6. Maintenance
6.1. Maintenance Schedule
This Instrument does not require any maintenance. It is however
recommended to check the sample flow daily.
WARNING
Stop operation before maintenance.
 Stop sample flow.
 Shut off power of the instrument.
6.2. Stop of Operation for Maintenance
1 Stop sample flow
2 Shut off power of the instrument.
Monthly Check sample flow
By occurrence Replace tubes
Clean flow meter