Swan Analytical Instruments AMI - Installation (Main Menu 5); Sample Flow Alarm High; Alarm Low; Hysteresis

AMI Sample Sequencer
Program Overview
A-96.250.661 / 120418 57
8.5. Installation (Main Menu 5)
Sequence Mode 5.1.1* * Menu numbers
5.1* Signal Inputs 5.1.2* only at continuous measurement
Flush Time 5.1.3* only at continuous measurement
Valid After 5.1.4* only at continuous measurement
Cycle Time Channel 1–6 only at continuous measurement
5.1.5
Sample Flow Alarm High 5.2.1*
5.2* Alarm Low 5.2.2*
Hysteresis 5.2.3*
Delay 5.2.4*
Miscellaneous Language 5.3.1*
5.3* Set defaults 5.3.2*
Load Firmware 5.3.3*
Password Messages 5.3.4.1*
5.3.4* Maintenance 5.3.4.2*
Operation 5.3.4.3*
Installation 5.3.4.4*