14
1.6 FUNCTION KEYS
1.6.1 CLEAR KEY
Operating in normal : move to following channel, adjust contrast or control lifting of probes with D110
measuring mode or D110V (choose between three functions by pressing Setup the Enter :
(refer to next page).
Operating in Min/Max mode : clears the Min/Max memory before taking a new measurement.
Operating in Set Up mode : cancels an input value or cancels a chosen menu without alteration.
Operating in Scanning mode: with the display of first measurement values picture, the Scan-mode is cancelled.
Otherwise the display will be regressed successively until it reaches the first one.
Operating in Stat mode : returns to normal display.
Operating in the Store mode : erases last value (s), starting from last one.
To Next Page
Loading...
