72
4.6 ACCESSORIES
Standard measuring tip with M2.5 thread, with 2 mm ball. Order No : 905.2204
(supplied with each probe).
Rubber boot set for P10 and P10L probes Order No : 901.2003
Rubber boot set for P25 probe Order N°: 901.2004
Lever with photo-cable, for P10/P25 probes Order N°: 901.2005
Lever with photo-cable, for P50 probe Order N°: 901.2006
Pneumatic lifting jack for P10/P25 probes Order N°: 901.2010
Pneumatic lifting jack for P50 probe Order N°: 901.2011
Input pressure is 2 to 3 bar (dry, filtered air). The jack does not affect the probe’s measuring pressure.
The unit is fully sealed and requires no maintenance.
To Next Page
Loading...
