31
To recall keyboard operation, choose one of the following options :
1/ press any key for at least 5 seconds
2/ switch on unit with Enter key pressed.
1.6.11.5 Activate/deactivate sound :
Activate/deactivate sound release of keyboard and exceed tolerance limit function.
1.6.11.6 Date/time input :
adjusting permanent clock : Year – Month – Day – Hour and Minutes.
Used for printing results, control chart and unit calibration.
1.6.11.7 Configuration
All unit configuration parameters (tolerances, presets, setups…) can be stored or recalled :
Give backup file number, then Enter
Insert name of file, in letters and numbers, max. six characters (allows for more efficient file management).
The Channel key switches from numerical to alphabetic input and back.
Up to 12 complete configurations may be stored.
To restore a configuration, simply select the file name, then Enter . The unit will appear exactly as it was stored.
NB : the Store memory is not saved.
to delete an element stored : select 1 : save, then number of file to be
deleted then Enter then Clear
The MEM? and MEMR remote command allow for the same operation a PC using link RS232.
Program D100SRS allows backup files to be managed on a PC.
To Next Page
Loading...
