12. ALTERNATOR/STARTING CLUTCH
12-7
A.C.G. Set Installation
Install the A.C.G. set onto right crankcase cover (2
screws).
Install pulse generator (2 screws).
Tie the wire harness securely onto the indent of
crankcase.
Caution
Make sure that the wire harness is placed under
pulse generator.
Flywheel Installation
Hold the flywheel with flywheel holder, and tighten
its nut.
Torque value: 5.0~6.0kgf-m
Tool:
Flywheel holder
The picture of flywheel after installing
Right Crankcase Cover Installation
Install cooling fan comp. (4 bolts 6×18) onto
flywheel. Install right crankcase cover.
To Next Page
Loading...
