16. STEERING / FRONT WHEEL / FRONT CUSHION
Install the steering stem mounting nut and tighten
the nut by means of holding the top cone race
body.
16-10
Torque value: 1.0~2.0kgf-m
Install in reverse order of removal procedures.
Shake steering handle up & down, left & right, and
front & rear to check if it is loosen, has too much
resistance and pulls to one side.
Check steering handle if it is being pulled too tight
y the brake cables.
b
Steering lock nut
Top cone-race
To Next Page
Loading...
