MC3000 Integrator Guide7-8
9. The EAP type selection settings available are dependent on the authentication selection. For the Open, WPA and WPS-PSK
authentication selections; the PEAP or the TLS, EAP types may be selected. Table 7-6 describes the EAP types option
settings.
10. The Shared authentication selection, disables the Enable 802.1X authentication option and it disables the EAP type selection
settings.
Figure 7-9. Wireless Properties, EAP Type Selection
Table 7-6. EAP Type, Authentication Selections - PEAP and TLS
Authentication Description
PEAP Select this option to enable PEAP authentication. This method uses a digital certificate to
verify the server and a password to verify the user identity.
TLS TLS is an authentication scheme through IEEE 802.1x. It authenticates users and ensures
only valid users can connect to the network. It also restricts unauthorized users from
accessing transmitted information. TLS achieves this through secure authentication
certificates.
WLAN123
WLAN123
To Next Page
Loading...
