Symmetricom TimeProvider 1000 - Retrieve Header (RTRV-HDR)

Chapter 2 TL1 Command Syntax and Description
Retrieve Header (RTRV-HDR)
104 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
Retrieve Header (RTRV-HDR)
This command displays the response header information, which includes the
system identifier (<sid>), and the system date and time. It can be used to verify
operation of the communication link between the TimeProvider and the computer.
This command has a default access level of NONE.
Syntax
RTRV-HDR:[<tid>]::[<ctag>];
Example
To retrieve the response header from the TimeProvider:
Input
RTRV-HDR:::TP1000;
Normal Response
TP-SSU 05-02-10 13:37:39
M TP1000 COMPLD
;
Autonomous Message
None