097-58001-01 Revision E – September 2006 TimeProvider TL1 Reference Guide 105
Chapter 2 TL1 Command Syntax and Description
Retrieve Inventory (RTRV-INV)
Retrieve Inventory (RTRV-INV)
This command retrieves the system inventory.
This command has a default access level of USER.
Syntax
RTRV-INV:[<tid>]::[<ctag>];
Command Output
The following shows the output format of the command, and Table 2-20 explains the
various fields in the command output:
Response Format
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"IMC:<p/n>,<s/n>,<clei>,<hw ver>,<fw ver>,<mac>"<cr><lf>
"IOC1:<p/n>,<s/n>,<clei>,<hw ver>,<fw ver>"<cr><lf>
"IOC2:<p/n>,<s/n>,<clei>,<hw ver>,<fw ver>"<cr><lf>
"RTMA:<p/n>,<s/n>,<clei>,<hw ver>"<cr><lf>
"RTMB:<p/n>,<s/n>,<clei>,<hw ver>"<cr><lf>
"RTMC:<p/n>,<s/n>,<clei>,<hw ver>"<cr><lf>
"RTMD:<p/n>,<s/n>,<clei>,<hw ver>"<cr><lf>
"E422A:<p/n>,<s/n>,<clei>,<hw ver>"<cr><lf>
"E422B:<p/n>,<s/n>,<clei>,<hw ver>"<cr><lf>
"E422C:<p/n>,<s/n>,<clei>,<hw ver>"<cr><lf>
"E422D:<p/n>,<s/n>,<clei>,<hw ver>"<cr><lf>
;
Table 2-20. RTRV-INV Output Fields
Field Description
p/n The module’s part number.
s/n The module’s serial number.
clei The Common Language Equipment Identification (CLEI) code for the module.
hw ver The revision number of the module’s hardware.
fw ver The revision number of the module’s firmware.
mac The media access control (MAC) address that uniquely identifies the Ethernet
hardware for the IMC module. The format is aa-aa-aa-aa-aa-aa
Note: If an element of a module’s inventory is not available, the
corresponding field is left blank in the command output.
To Next Page
Loading...
Need help?
General
